Cables and gauges E'TALON USB cable, COM cable, etc.

The cable is designed to provide data transmission from a digital measuring instrument to a personal computer or other computing device.

Interface connection cable with USB port:

• It comes with software optimized for the Win9x/Win2000/WinXP/WinVista operating system;
• the software makes it possible to print data, provides measurement results in graphical form;
• RS-232 computer communication protocol;
• the ability to output data using a pedal button (Type 8).

Interface connection cable with COM port:

• It comes with software optimized for the Win9x/Win2000/WinXP/WinVista operating system;
• the software makes it possible to print data, provides measurement results in graphical form;
• RS-232 computer communication protocol;
• the ability to output data using a pedal button (Type 6) or an analog of a pedal button (Type 1, Type 4).

Calibres-sheet brackets for shafts and lengths are designed to control shafts from 1 to 480mm.

Has:

• possibility of one-sided execution up to 450mm;
• the possibility of single-limit or double-limit execution.

Caliber-bracket smooth one-limit:

• possibility of one-sided execution up to 480 mm;
• the possibility of single-limit or double-limit execution.

The smooth gauge plug is designed to control holes and shafts with nominal dimensions from 1 to 500 mm.

Has:

• the possibility of manufacturing a set of inserts on one handle;
• the possibility of manufacturing inserts of an incomplete profile.

Thread gauges UNC, UNF, UN, UNEF are designed to control inch threads with a profile angle of 60°.

Has:

• the possibility of manufacturing a set of inserts on one handle;
• the possibility of manufacturing accuracy class 2A and FOR calibres-rings and control calibres-plugs.

The threaded gauge for the control of cylindrical pipe thread (G) is designed for the control of cylindrical pipe thread size from 1/16 to 8.

Has:

• the possibility of manufacturing a set of inserts on one handle;
• the possibility of manufacturing the left thread (LH);
• the possibility of manufacturing accuracy class A and B.

The threaded gauge for trapezoidal thread control (Tg) is designed to control single-pass trapezoidal thread.

Has:

• the possibility of manufacturing a set of inserts on one handle;
• the possibility of manufacturing the left thread (LH);
• the possibility of manufacturing a shortened profile.

The threaded gauge for metric thread control (M) is designed for metric thread control.

Has:

• the possibility of manufacturing a set of inserts on one handle;
• the possibility of manufacturing the left thread (LH).

Models: interface connection cable with USB port, with COM port, gauge-sheet brackets for shafts and lengths, gauge-plug smooth, UNC, UNF, UN, UNEF, G, Tg, M.