Shipping throughout Russia and to other countries

Plates and prisms E'TALON PG, IF, PS, etc.

The plate is designed to control the flatness of parts and marking work, as well as used as an installation surface during assembly, measurements and verification.

Granite calibration and marking plate (PG):

  • the flatness of the working surface corresponds to the selected accuracy class;
  • high wear resistance;
  • minimal dependence on temperature;
  • no magnetic and electrical conductivity;
  • acid-resistant and not subject to corrosion.

Plate calibration and marking cast iron (IF):

  • the flatness of the working surface corresponds to the selected accuracy class;
  • high wear resistance.

The cast-iron calibration and marking prism with one prismatic notch and a P2 (IF) type overlay is designed for the installation of products with a diameter from 8 to 160 mm during calibration and marking works.

  • they are made of steel with a hardness of at least 170-229NV;
  • they are supplied in pairs.

The steel calibration and marking prism with one prismatic notch and a P1 (PS) type overlay is designed for the installation of products with a diameter from 3 to 110 mm during calibration and marking works.

  • they are made of steel with a hardness of at least 59HRC;
  • supplied in pairs;
  • equipped with clips for fixing.

Models: IF, PG, IF, PS.

DOCUMENTS

Questionnaire

All E'TALON products

The group "New Technologies" offers for review the products of the plant E'TALON: calipers, thickness gauges, micrometers, nutrometers, calipers
  • Calipers E'TALON
    Calipers
    ShTs-1 Standard, ShTs-3, ShTs-2, etc.
  • Micrometers E'TALON
    Micrometers
    MRI, MR, MP, MZC, MZ, MTI7, etc.
  • Staples E'TALON
    Staples
    SRPC, SRP, etc.
  • Micrometer heads E'TALON
    Micrometer heads
    MGC8, MG8, MG7, MGC4, MG5, etc.
  • Thickness gauges E'TALON
    Thickness gauges
    TI, TIN, TPC, TISRC, TISR, etc.
  • Wall meters E'TALON
    Wall meters
    CIC, SIU, SI, etc.
  • Nutromeres E'TALON
    Nutromeres
    STC, NT, SIC, etc.
  • End length measures E'TALON
    End length measures
    KMD, PKMD, MCC, MCC, etc.
  • Flat angle measures E'TALON
    Flat angle measures
    H1, H2, H3, H4, etc.
  • Angles and protractors E'TALON
    Angles and protractors
    USH, SFM, UM6, UM5, etc.
  • Surface roughness samples E'TALON
    Surface roughness samples
    OSCHP et al .
  • Templates E'TALON
    Templates
    USCC-2, USCS-2, etc.
  • Indicators E'TALON
    Indicators
    IG, IGPV, MIG, etc.
  • Roulettes and rulers E'TALON
    Roulettes and rulers
    LM, SHM, LD, etc.
  • Probe Sets E'TALON
    Probe Sets
    A set of side probes, etc.
  • Procrastination and rollers E'TALON
    Procrastination and rollers
    Smooth wires, etc.
  • Calipers E'TALON
    Calipers
    Type A, B, C, D, etc.
  • Shtangenreysmas and shtangenglubinometers E'TALON
    Shtangenreysmas and shtangenglubinometers
    SHRC, SHR, SHGC, SHG, etc.
  • Depth gauges E'TALON
    Depth gauges
    GI, GMP,GM, GMPC, etc.
  • Levels E'TALON
    Levels
    UB, UR, etc.
  • Racks and tripods E'TALON
    Racks and tripods
    MC29, CM, 15CT-M, etc.
  • Plates and prisms E'TALON
    Plates and prisms
    PG, IF, PS, etc.
  • Cables and gauges E'TALON
    Cables and gauges
    USB cable, COM cable, etc.

About E'TALON

The modern enterprise ETALON (Moscow), which manufactures measuring instruments, fully complies with Russian quality standards. The range of the company is constantly expanding, work is underway to certify the instrument.

  • MEASUREMENT ACCURACY

    The ETALON company produces a wide range of tools, the main feature of which is measurement accuracy and reliability.

  • PRODUCTION QUALITY

    The specialists of the ETALON enterprise are constantly working to improve the quality of products, increase their competitiveness, and expand the assortment.

  • IMPORTED EQUIPMENT

    Imported equipment from the USA, Germany, Switzerland is used for the manufacture of tools. The average age of the equipment is 4-6 years.

Information Board E'TALON

Learn more about our products E'TALON.
  • Questionnaire in the store THE STANDARD
    Questionnaire

NEW TECHNOLOGIES GROUP

For sales and support please contact
Send your question now: